Lion Hook 60mm Over-sized Jaw

Lion Hooks over-size 60mm Jaw

The Lion Hook is a FASET approved safety net rigging claw.   Designed to allow the erection of type S safety nets to the requirements of EN1263-2.  Suspended directly from the steel frame as close as possible below the working level.  The Lion Hook safety net claw can be attached to the steel beam using the 2.5m applicator pole.

The Lion Hook is ideal for Mezzanine Floors, Metal Decking but can be used on most I beam steel structures. Using the Lion Hook you can reduce the use of tie ropes when installing your safety nets. A novice installer can install safety nets like a pro and the more experienced installer will be able to install a safety net solely with the Lion Hook no ropes needed.

The LION HOOK and applicator have been designed to allow the installation of type S safety nets to the requirements of EN1263-2 and Conforms to BSEN 1263-1/2 dynamic load requirements.

Please note: 60mm Jaw is to be used on steel minimum of 45mm up to 60mm thick